13 ft Saturn Extra-Wide Inflatable Fishing Micro Skiff FSUP380
Uniquely shaped inflatable extra wide paddle board with outline of inflatable motor boat.
New FSUP380 motor board Micro Skiff features total of 4 splash guards with grommets holes on both sides. There are extra wide rub strakes between splash guards for storage and extra protection. FSUP motor board creates unique and versatile watercraft that can be rigged and used in a multitude of ways - for stand up paddling, or for using with optional beach chairs, or even zero gravity lounger.
Most basic use of FSUP380 paddle board is while stand up paddling with SUP paddle. It wide enough to walk on it, and to accommodate up to 2-3 persons. Most comfortable use is with 1-2 beach or lawn chairs chairs, secured between splash guards with optional lashing tie downs. Will need 4 lashing tie downs per chair. Even zero gravity lounge can be secured between grommets in splash guards.
FSUP board comes with kayak gear tracks for optional rod holders, cup holders and other accessories that can be secured to regular type of kayaks. In addition, there are 2 mount base patches that can work with both Scotty or Railblaza accessories.
Motor mount can be secured between seat of 4 D-ring in a rear of this board, using set of 2 lashing tie downs. Electric trolling motor or small gas outboard up to 3HP can be used with this board, turning it into perfect Micro Skiff. Set of 6 D-rings in front can be used for optional DIY install of leaning post or stand up frame.
Best use of FSUP380 motor board is when it paired with our optional Electric Fin. It is ideal combination, offering speeds around 4 mph and hours of fun. SUP paddle can act as a rudder, to easily steer into direction you need to go. Go for miles and reach best fishing spots with ease.
FSUP380 is also easier to carry from car to the water, by simply attaching optional kayak cart to front of board, and using rear end tubes handles to comfortably pull loaded board behind a person. FSUP380 board features 2 valves for faster deflation.
Inflatable Fishing Paddle Board FSUP380:
- Extra wide and stable - 13'long x44" wide. Only 47lbs.
- Inflatable motor boat shape for best performance with small motor.
- Easily reach your favorite fishing spot on a lake, ocean, river or bay.
- Set of grommet splash guard along SUP sides for various gear attachment.
- 13' FSUP380 can be used as a sit-on-top kayak for 1-3 person.
- Pointed bow helps to cut through ocean waves and gives streamlined appearance.
- Constructed of 150mm (6") heavy-duty PVC drop-stitch fabric.
- Recommended air pressure: 6 psi for seating, 10psi for standing.
- Two air valves for faster inflation and deflation.
- High-pressure SUP hand pump, carry bag and repair kit are included!
- FREE BONUS - removable motor mount for electric trolling or gas motor up to 2.5HP!
- FREE BONUS - aluminum SUP paddle to use as a rudder!
- Please see Attachments tab for optional DIY ideas and how to shift transom if needed.
Unboxing of Saturn 13' Micro Skiff FSUP380. Run with 3HP Newport motor.
Video of shorter, 12' prototype FSUP365 boat with electric fin.
Video of shorter, 12' prototype MSUP365 boat set up with trolling motor.
Quick Tip: Use kayak cart to move FSUP board around. Place kayak cart under bow area of FSUP, and secure with bungee cords to D-rings on top of board. Use rear handles to pull FSUP behind or push forward. Cut out in rear of FSUP board is perfect for this purpose.
FAQs:
Question: Does trolling motor shaft should touch edge of board when installed on motor mount?
Answer: Yes, this is an intentional design feature to support heavier motors. The motor shaft is meant to rest against the reinforced edge of the XFSUP board, which has an added PVC layer to handle the load. Forward thrust of heavier outboard motors creates a lever effect that puts high stress on the motor-mount D-rings, and the shaft contact helps distribute that force. Shaft movement will not damage the heavy-duty fabric under normal use. For easier use, lock the shaft in the forward position and steer with a paddle as a rudder; a tiller-extension handle from Amazon can be used if extra reach is needed.
Question: How can I increase the strength of cam-buckle tie-downs for heavier outboards?
Answer: These simple changes make cam-buckle tie-downs hold much stronger when using 3HP+ outboards.
- Tie the loose end of the strap into a knot so it cannot slip through the buckle.
- Run additional straps through the same D-rings to spread the load.
- If the buckle allows, pass the strap through the cam twice for extra friction.
- Use optional cam buckles with deeper, hardened teeth for a stronger bite.
- Switch to optional textured or rubber-thread webbing that grips better than smooth straps.
- Add a small keeper loop or wrap the tail around the main strap for extra security.
- Use optional anti-slip rubber under the strap to reduce movement and vibration.
- Keep straps pulling straight back and avoid sideways angles to reduce slippage.
- Add a small forward-pulling bungee to reduce shock loads on the buckle.
