13' Xtreme Fishing Micro Skiff XFSUP380

13' Xtreme Saturn Extra-Wide Inflatable Fishing Micro Skiff XFSUP380 V2

The new XFSUP380 V2 comes upgraded for better performance and safety:

• Dual air-chamber system with two independent chambers in each board for added safety.
• Reinforced stainless steel motor-mount corners for extra strength and long-term durability.
• Heat-fused double-layered PVC for a stiffer, more durable, and more puncture-resistant board.

Meet the XFSUP380 — a uniquely shaped, extra-wide inflatable paddle board designed with the outline and functionality of a compact inflatable motor skiff. This new dual-motor-mount micro skiff features a redesigned blunt bow for even greater stability, plus added D-rings at the front and rear, giving you full flexibility when rigging motors or accessories. You can even pair it with a bow-mounted GPS-guided electric motor system, such as the AUTOBOAT SMART HEAD, for hands-free precision control and unmatched fishing convenience.

In its simplest form, the XFSUP380 is a wide, stable SUP that is comfortable enough to walk on and large enough to carry two to three people. For a more relaxed setup, one or two beach or lawn chairs can be strapped securely between the splash guards using optional lashing tie-downs. Four tie-downs are required per chair. A zero-gravity lounger can also be attached using the splash-guard grommets.

For anglers, the XFSUP380 includes pre-installed kayak gear tracks for rod holders, cup holders, and other compatible accessories, plus two accessory base patches that accept both Scotty and Railblaza mounts.

A motor mount can be attached to the set of four rear D-rings using two lashing tie-downs. The board supports electric trolling motors or small gas outboards up to 3 HP, turning it into a compact and capable micro skiff. The six forward D-rings allow easy DIY installation of a leaning post or stand-up frame.

One of the top upgrades for the XFSUP380 is the optional K4 Electric Fin propulsion system, delivering smooth cruising at about 4 mph with impressive efficiency. The latest K4 model also features convenient remote steering for an even better ride.

This is not your typical lightweight inflatable paddle board you get on Amazon. It is built big, rugged, and extremely durable, featuring double-layer construction on the top and bottom, double air chambers, heavy-duty rub strakes along the sides, and additional protection on both top and bottom. It also includes multiple accessories and a motor-mount option for added versatility.

Because of this heavy-duty construction, the board weighs about 68 lbs. For easier transport, especially for solo users, an optional kayak cart is highly recommended. Attach kayak cart to the front of the board with bungee cords or straps, grab the rear tube handles, and pull the loaded XFSUP380 straight from your vehicle to the water. Dual air valves make deflation quicker and easier as well.

Inflatable Fishing Paddle Board XFSUP380 V2 Features:

• Wide, ultra-stable platform: 13 ft long, 44 in wide, weighing around 68 lbs
• Side splash guards with grommets for securing gear or chairs in multiple ways
• Functions as a sit-on-top kayak for 1–3 paddlers or stand up paddle board.
• Constructed from heavy-duty, double layer 150 mm (6 in) drop-stitch PVC
• Recommended pressure: 6 psi when sitting, 10 psi when standing
• Features double air chambers for additional safety and extra siffness on a water
• 4 x Scotty type rod holder mounting bases for Scotty fishing rods and accessories
• Optional Railblaza adapters can be mounted over Scotty stype bases
• 2x Plastic gear tracks for optional kayak accessories, rod holders, cup holders and more
• Dual air valves in a main chamber for quicker deflation
• Includes high-pressure hand pump, carry bag, and repair kit
• 1 x Free removable motor mount for electric or gas motors up to 3 HP
• 2 x Motor mount straps with premium stainless steel buckles
• 1 x Free aluminum SUP paddle included as a bonus!
• Please note: Railblaza adapters are not included. These can be purchased on Amazon.

IMPORTANT: When using heavier motors, ensure that the motor shaft is firmly resting against the board surface to provide proper support and prevent unnecessary stress on the mounting area. See additional FAQs below this page.

Water test of Saturn Micro Skiff XFSUP380 V1 with various motors.

Video of similar design FSUP365 boat with Electric Fin propulsion.

Quick Tip: Use kayak cart to move XFSUP board around. Place kayak cart under bow area of XFSUP, and secure with bungee cords to D-rings on top of board. Use rear handles to pull XFSUP behind or push forward. Cut out in rear of XFSUP board is perfect for this purpose.

FAQs:

Question: Does trolling motor shaft should touch edge of board when installed on motor mount?

Answer: Yes, this is an intentional design feature to support heavier motors. The motor shaft is meant to rest against the reinforced edge of the XFSUP board, which has an added PVC layer to handle the load. Forward thrust of heavier outboard motors creates a lever effect that puts high stress on the motor-mount D-rings, and the shaft contact helps distribute that force. Shaft movement will not damage the heavy-duty fabric under normal use. For easier use, lock the shaft in the forward position and steer with a paddle as a rudder; a tiller-extension handle from Amazon can be used if extra reach is needed.

Question: How can I increase the strength of cam-buckle tie-downs for heavier outboards?

Answer: These simple changes make cam-buckle tie-downs hold much stronger when using 3HP+ outboards.

• Tie the loose end of the strap into a knot so it cannot slip through the buckle.
• Run additional straps through the same D-rings to spread the load.
• If the buckle allows, pass the strap through the cam twice for extra friction.
• Use optional cam buckles with deeper, hardened teeth for a stronger bite.
• Switch to optional textured or rubber-thread webbing that grips better than smooth straps.
• Add a small keeper loop or wrap the tail around the main strap for extra security.
• Use optional anti-slip rubber under the strap to reduce movement and vibration. 
• Keep straps pulling straight back and avoid sideways angles to reduce slippage.
• Add a small forward-pulling bungee to reduce shock loads on the buckle.