Electric Fin Motor For Kayaks and SUPs V2

Boost Your Water Adventures with the Electric Fin Motor for Kayaks and SUPs.

Ride for hours on a single charge. Or, use as a paddle assist to go further!

• New V2 of EP18Li Now Available! Offers hassle-free cable connection and simple remote pairing when needed — improved for convenience and reliability.
• The new V2 now includes a remote with replaceable batteries, giving you more convenience and longer-lasting use.
• V2 offers a quick snap power connection and a waterproof charging port for easier, safer use.

Transform your paddle board or inflatable kayak experience with revolutionary Electric Fin Motor! Say goodbye to strenuous paddling and hello to effortless propulsion. This must-have accessory is perfect for any water enthusiast, and it's especially fantastic for fishing trips.

Key Features:

1. Unmatched Convenience: Once you experience the power of our electric fin, you’ll never want to paddle without it again.
2. Portable and Lightweight: Easy to carry and install, this electric fin is the perfect companion for your kayak or paddle board.
3. Built-In Brushless Motor: Enjoy smooth, powerful propulsion with our advanced brushless motor technology.
4. Remote Control: Effortlessly control your speed and direction with the wrist wireless remote.

Versatile Installation:

• Multiple Adapters Included: Comes with 2 adapters for installation on inflatable SUPs or kayaks, or SUPs with slot installs.
• DIY Friendly: Can be installed on rotomolded kayaks using a rudder as a DIY project. See attachments tab for instructions.

Upgrade your water adventures today with the Electric Fin Motor, and enjoy a new level of freedom and excitement on the water!

EP18Li Electric Fin Specifications:

• New V2 now offers easy cable connection and pairing new remotes if needed.
• Wireless Remote modes: Reverse, Forward Drive (D), Forward Sport (S).
• Spare remotes are available.
• Included: electric fin, 2 mounting adaptors, wrist remote controller, safety lanyard, lithium battery and charger. 
• All water proof, lightweight and very convenient. 
• Battery is 25.6V, 288Wh, continuous current max. 18A. Charge time: 4hr.
• Max speed: 4.6mph or 5mph when used as paddle assist. Speed depends on weight, watercraft geometry, water/wind condition.
• Fin comes with convenient foam storage box. Box size: 18x18x5". Fin with box weight: 6lbs.
• Warranty: 6 month. Please read important Warnings and Quick Tips below videos.
• See Attachment tabs for DIY idea for kayak rudder install.

PLEASE NOTE: Overall speed and run time depends on various conditions, including weight of watercraft, overall load, water condition, wind, geometry of kayak or SUPs.

Electric Fin Motor installed on Saturn Inflatable Board FSUP380

Electric Fin Motor installed on Saturn Inflatable Paddle Board SUP414

Electric Fin Motor installed on a cheap kayak from Walmart

Electric Fin Motor installed on Inflatable Kayak

Instructions for DIY Electric Rudder For Kayak

Electric Fin Motor installed on Saturn Inflatable Fishing Kayak FK396

DETAILED SPECIFICATIONS OF EP18Li MODEL:

• Power: 160W 
• Max thrust: 18-20 pounds
• Max speed: 4.6mph/h
• Run time: about 2 hrs at max speed ( S ) 4.5-5 hrs at regular speed ( D )
• Remote controller: max control distance: 5 m
• Max stand-by time: 2 years. 
• Charge every 6 month to maintain battery.
• Battery: 288wh
• Battery voltage: 25.6 v
• Continuous current: max. 18 A
• Charge voltage: 29.4 v
• Charge time from emtpy: 4 hrs

WARNINGS:

1. READ THE MANUAL BEFORE USE.
2. Safety Lanyard: Always attach the safety lanyard before powering on the device. The lanyard must also be securely connected to the user to automatically shut down the motor in case of a fall from the watercraft.
3. Connections and Batteries: Ensure all wires are properly connected and fully engaged. Verify that batteries are fully charged.
4. Pre-Run Testing: Test all connections and the motor at home before heading out on the water. Do not run the motor for more than a few minutes outside of water.
5. Disconnecting Wires: Do NOT pull on wires to disengage quick disconnect clips. Always use the body of the disconnect clip.
6. Battery Box Safety: Do NOT submerge the battery box in water. While the motor and remote are water-resistant, the battery box is only splash-resistant.
7. Electric Fins: The controller is pre-paired with the electric fins set. There is no need to pair before use.
8. Component Alterations: Do NOT open or modify components without consulting us first.
9. Cables and Caps: Avoid overtightening power cables, charging cables, and protective caps over power and charging ports of the Li battery dry box. Over-tightening can make unscrewing difficult and may loosen the internal nut holding the port inside the dry box.

Maintenance Tips for Prolonging Motor Life:

• Rinse After Saltwater Use: After each use in saltwater, flush the motor with fresh water for at least 2-3 minutes. For best results, run the motor in a bucket filled with fresh water for the same duration.
• Check Power Cable Contacts: Ensure the power cable contacts are clean and free of corrosion. If needed, remove any residue and spray with WD-40 Contact Cleaner. Poor connections can impact motor performance.

QUICK TIPS:

• Steering Made Easy: Use a kayak or SUP paddle, or simply lower one foot into the water to steer your watercraft. For an improvised rudder, tuck one paddle end under your armpit and let the other end trail in the water. Adjust direction by applying gentle pressure to the paddle.
• Avoid Seaweed: Steer clear of seaweed patches to prevent propeller issues.
  • If seaweed gets caught in the prop, run the motor in reverse to push it out.
  • Alternatively, move to shallow water and manually clear the motor grill.
• Removing the Grill: The motor grill can be removed if needed. Simply take out the two small screws and pull the grill out for easy cleaning or maintenance.

More Videos from YouTube