Heavy-Duty SATURN Inflatable Marine Fenders.
Made with 1.5 mm German Heytex PVC & Heat-Welded Seams.
Unlike bulky traditional vinyl fenders that take up valuable space on board, SATURN Inflatable Marine Fenders are designed for maximum portability and convenience. Simply deflate, roll them up, and store them almost anywhere on your boat. When needed, they can be fully inflated in just minutes and deflated even faster for compact storage.
Many boat owners leave extra heavy vinyl fenders behind because they are difficult to store onboard. SATURN Inflatable Fenders solve that problem with a portable, foldable design that fits easily into small storage compartments while still providing outstanding protection during docking and mooring.
Built for serious marine use, SATURN Fenders are manufactured from extra heavy-duty 1.5 mm German Heytex PVC fabric with heat-welded seams for superior durability and reliability. Our premium 1.5 mm PVC material is nearly twice as thick as standard PVC used in many inflatable fenders, making SATURN fenders significantly tougher and more durable than many higher-priced fenders on the market today.
- Flat standard pushpin valve and 2 stainless steel D-rings glued at both ends.
- Shipping (packing size): 28x14x4"
- See specs for weight of fenders.
- Hand pumps and electric pumps are available at our Accessories section.
- Optional valve adapters also available.
Question: How do I inflate SATURN inflatable fenders?
Answer: SATURN inflatable fenders can be inflated with regular hand or foot pumps, but the fastest and easiest method is using an inexpensive electric mattress pump available from Amazon, Walmart, Target, or most sporting goods stores.
To inflate, open the valve cap and press the pushpin inside the valve down while rotating it to lock it in the open position. Hold the air outlet of the electric pump directly against the valve and turn the pump on. The fender will inflate in seconds. Once inflated, quickly remove the pump nozzle and rotate the pushpin back so it pops up into the closed position to prevent air loss. Close the valve cap afterward.
Inflatable fenders should remain slightly soft and flexible. They do not need to be rock hard, as a softer fender helps absorb impacts and reduces wear against rough surfaces.
Question: What is the warranty for SATURN inflatable fenders?
Answer: SATURN inflatable fender seams are covered by a 3-Year Manufacturer Warranty. D-rings are not covered under warranty, as they are considered wear items.
Our D-rings are made with two heavy-duty layers of reinforced PVC fabric and are designed to support reasonable loads of up to approximately 100 lbs. However, they are not intended to support the full weight of a boat.
As tides change, a boat may lower and place excessive strain on the fender and D-rings, which can cause tearing or damage. This type of damage is considered excessive wear and is not covered under warranty. Please position fenders carefully and take tidal changes into consideration during use.
Customer's Review:
By Tsm on Dec 05, 2017 "Couldn’t be happier. Going to buy a third for a back ... So I took the advice of the web site and hung these horizontal so they could roll with the vessel as needed. Last night we had 20-50mph winds, and these things took a beating literally all night, eyelets held firm. I used two on a 40’ 20k pound vessel, couldn’t be happier. Going to buy a third for a back up just in case, as it will be a long winter."
