No-Drill Wheels for Inflatable Boats

No-Drill Transom Launching Wheels for Inflatable Boats.

• Detachable wheel system for inflatable boats and dinghies. 
• Easy attach and remove. No need to drill holes in a transom. Attached with clamps only.

Introducing the No-Drill Transom Launching Wheels – the ultimate hassle-free solution for inflatable boats and dinghies!

Say goodbye to drilling and hello to convenience with this detachable wheel system. Designed specifically for those who want to protect their boat's transom, these wheels attach easily with secure clamps – no drilling required! 

Why choose No-Drill Launching Wheels?

• Quick & Easy Setup: Attach and remove in minutes without the worry of damaging your boat.
• No Drilling Needed: Securely clamps onto your boat’s transom, so there’s no need to alter your boat permanently.
• Heavy-Duty Design: The L-shaped tubes provide extra support, making transportation to the water a breeze.
• Compact & Removable: Once in the water, simply remove the wheels and store them either inside the boat or attach them on top for easy access.

Make boat launching easier, quicker, and worry-free with the No-Drill Transom Launching Wheels!

Specifications:

• Aluminum rectangular bracket attached to transom with two clamps.
• Launching wheels tube can lock in upper position when not in use. 
• Wheels tube be easily detached simply be loosening thumb bolt.
• Wheels are 10" puncture free, non pneumatic. 
• Max load 250lbs.
• Max transom thickness 1.5". 
• Transom must be flat, and have no flanges on top or bottom.
• Please see Attachment tab for instructions.

Frequently Asked Questions:

Q: Can I use these wheels to tow my boat behind my car?  
A: No, these wheels are designed for short-distance transportation, such as moving your boat from a parking lot to the water. They are not legal or safe for towing behind a vehicle. For towing, we recommend using a proper trailer.

Q: How do these wheels work?  
A: The wheel assembly can be locked into three positions:  
- Lower position for easy transportation to the water.  
- Upper position while operating your boat.  
- Completely removed for storage or when deflating the boat.

Q: Where can I get replacement tubes if the wheels get punctured?  
A: No need to worry! These wheels are solid and do not contain pneumatic tubes, so they cannot be punctured.

Q: What maintenance suggested to prolong lifespan of this product?  
A: When using the detachable wheel system in saltwater, it is recommended to rinse all components with fresh water after use. At the first sign of any corrosion, apply WD-40 to help protect moving parts, such as clamps. Avoid fully submerging clamp bracket section that attaches to the transom. The wheel axles are made of stainless steel bolts and nuts, which are designed to be resistant to corrosion.

Q: Wheels seems to touch vertical tube when towing heavy loaded boat?  
A: Ensure that the locknut on the axle bolt is securely tightened. Since this is a newly developed system, further improvements may be possible. For example, the axle can be enhanced by using a longer axle bolt and increasing the plastic spacer width. This adjustment would help position the edge of the wheel farther away from the vertical tube, improving clearance and functionality.