13' Xtreme Saturn Extra-Wide Inflatable Fishing Micro Skiff XFSUP380
Meet the XFSUP380 — a uniquely shaped, extra-wide inflatable paddle board designed with the outline and functionality of a compact inflatable motor skiff. This new dual-motor-mount micro skiff features a redesigned blunt bow for even greater stability, plus added D-rings at the front and rear, giving you full flexibility when rigging motors or accessories. You can even pair it with a bow-mounted GPS-guided electric motor system, such as the AUTOBOAT SMART HEAD, for hands-free precision control and unmatched fishing convenience.
The updated XFSUP380 motor board layout includes four splash guards fitted with grommet holes on both sides, along with oversized rub strakes between them for added gear protection and storage capacity. This transforms the board into a highly adaptable platform that can be configured for stand-up paddling, outfitted with beach chairs, or even set up with a zero-gravity lounger.
In its simplest form, the XFSUP380 is a wide, stable SUP that is comfortable enough to walk on and large enough to carry two to three people. For a more relaxed setup, one or two beach or lawn chairs can be strapped securely between the splash guards using optional lashing tie-downs. Four tie-downs are required per chair. A zero-gravity lounger can also be attached using the splash-guard grommets.
For anglers, the XFSUP380 includes pre-installed kayak gear tracks for rod holders, cup holders, and other compatible accessories, plus two accessory base patches that accept both Scotty and Railblaza mounts.
A motor mount can be attached to the set of four rear D-rings using two lashing tie-downs. The board supports electric trolling motors or small gas outboards up to 3 HP, turning it into a compact and capable micro skiff. The six forward D-rings allow easy DIY installation of a leaning post or stand-up frame.
One of the best pairings for the XFSUP380 is the optional Electric Fin, offering cruising speeds around 4 mph with excellent efficiency. Steering is simple — just use your SUP paddle as a rudder and effortlessly glide to distant fishing spots.
Transport is equally convenient. Attach an optional kayak cart to the front of the board, grab the rear tube handles, and pull the loaded XFSUP380 straight from your vehicle to the water. Dual air valves make deflation quicker and easier as well.
Inflatable Fishing Paddle Board XFSUP380 Features
• Wide, ultra-stable platform: 13 ft long, 44 in wide, weighing just 47 lbs
• Inflatable motor-boat-inspired shape for superior performance with small motors
• Reach fishing spots easily on lakes, rivers, bays, or coastal waters
• Side splash guards with grommets for securing gear in multiple ways
• Functions as a sit-on-top kayak for 1–3 paddlers
• Pointed bow helps cut through waves and improves overall tracking
• Constructed from heavy-duty 150 mm (6 in) drop-stitch PVC
• Recommended pressure: 6 psi when sitting, 10 psi when standing
• Dual air valves for quicker inflation and deflation
• Includes high-pressure SUP hand pump, carry bag, and repair kit
• 1 x Free removable motor mount for electric or gas motors up to 2.5 HP
• Free aluminum paddle that doubles as a convenient rudder when using with electric fin.
Water test of Saturn Micro Skiff XFSUP380 with various motors.
Video of similar design FSUP365 boat with Electric Fin propulsion.
Quick Tip: Use kayak cart to move XFSUP board around. Place kayak cart under bow area of XFSUP, and secure with bungee cords to D-rings on top of board. Use rear handles to pull XFSUP behind or push forward. Cut out in rear of XFSUP board is perfect for this purpose.
FAQ:
Question: Does trolling motor shaft should touch edge of board when installed on motor mount?
Answer: Yes, that is design feature, to allow additional support for heavier motors when attached to the motor mount. Motor shaft should freely rest against edge of surface of the XFSUP board. Working prop that moves board forward creates lever, pulling heavily on a motor mount secured to D-rings. Without additional support excessive force could damage D-rings fittings. Rotating motor shaft resting against surface of board will not damage it, as most of the movements are minimal and it is heavy-duty fabric. However, if shaft rotates hundred times per seconds, then additional PVC patch can be glued to that edge for extra protection. For easiest set up, we recommend to tighten shaft lock in forward position, and use paddle to steer board when moving, instead of steering with a motor tiller. While you can choose to steer with motor tiller handle, we believe the best way is to steer with paddle that act as a rudder.
No posts found