SALE 50% OFF
Quality Inflatable Boats Since 1999

15' Inflatable Boats HD470

$1,799.00
Short description:
MSRP: $3,598.00  
HD470
$159.00
Out of stock

NEW Heavy Duty 15' Saturn Inflatable Boat HD470

  • German Heytex PVC fabric.
  • Heat welded seams.
  • 5 (five) air chambers in a hull.
  • Premium C7 air valves.
  • Cargo area on top of tubes.
  • Extra thick 1.5mm PVC V shape bottom
  • Extra wide rub strakes on bottom tubes and keel.
  • BONUS - Fishing Rod Holders!

Based on extremely popular FB series of boats, new and longer 15' SATURN HD470 Heavy Duty boats are made with premium quality German PVC materials, and can handle up to 8 persons. Heavy-duty HD470 boat takes up to a maximum of 40 HP outboard motor, but will plane easily with a smaller 15-25 HP outboards. HD boats tubes are produced with advanced heat welding methods, and have reinforced transom holders. Heat welding seams offering better resistance against heat and humidity in a long run.

15' HD470 is exactly same as 14' HD430, but longer, has 3 benches instead of 2 and offer more spare inside and more buoyancy.

Extra wide and thick rub strakes at the bottom of the tubes and along the keel provide extra protection from sharp rocks and abrasive sand. The safety valve will prevent excessive air pressure in the boats chambers.

What makes HD470 inflatable boats unique, is a double grommet splash lines on top of tubes, with extra wide rub strake in between them. That area designed to be used for extra cargo, such as diving gear, fishing rods, coolers, boxes or duffel bags, etc. Any type of gear can be lashed down with bangee cords or tie downs between grommets. That will free up valuable real estate inside boat cockpit, leaving more space to operate boat and move around.

Saturn HD470 inflatable boats come with a 5 section heavy-duty aluminum floor. Floor installation steps are here. Please note that tubes and keel must be as hard as rock when inflated to avoid cracking to the floor.

SATURN INFLATABLE BOAT HD470 FEATURES:Click to see how to install plywoodd floor and assemble inflatable boat.

  • All around rope safety grab line.
  • Second internal grommet line inside tubes.
  • Five Separate internal air chambers.
  • Tree one-way drain valves with plug.
  • All around, durable rubber strike.
  • Safety valve to prevent over inflation.
  • Stainless steel D-rings for easy towing.
  • Multiple D-rings inside hull for lashing.
  • Rounded end tubes for better engine support.
  • D-rings on rear of tubes for light duty towing.
  • Premium C7 air valves with pushpin design.
  • Front bow D-ring with integral lifting handle.
  • Spare rope for attaching anchor is included.
  • Extra wide rub strakes along boat tubes and keel.
  • Holds up to 7 persons maximum or 4-5 comfortably.
  • Deep inflatable V-keel with wide rub strake protector.
  • Heavy-duty marine grade aluminum floor is included.
  • Extra reinforced heavy-duty marine grade plywood transom.
  • Lightweight and strong removable aluminum seat benches.
  • Free second bench is included when order is placed on-line!
  • Equipment: Manual, T-paddles, repair kit, seat bench and carry bag.
  • Free, complimentary generic high-volume hand pump is included.
  • For the list of optional available Accessories please click here.

Quick Tip! Worried about the heavy weight of a hard floored boat? Don't break your back! Get a foldable hand cart from any retail store to carry the folded boat around. Even inexpensive dolly movers will work great for transporting a folded or fully inflated boat. Get dinghy dolly wheels to easily move the inflated boat across the shore and into the water.


Saturn Inflatable Boats Specifications:

Overall Length:
15.5'
Inside Length:
11.25'
Overall Width:
6.6'
Inside Width:
3.3'
Tube Diameter:
20"
Chambers:
3+1
Person Capacity:
8
Loading Capacity:
1830 lbs
Max Motor Power:
40 HP (15" shaft / 175 lbs)
Tube Shipping Size:
59 x 29 x 14"
Tube Weight:
148 lbs
Tube Shipping Weight:
150 lbs
Floor Type:
Aluminum sectional floor
Floor Shipping Size:
48 x 28 x 6"
Material:
1100 Denier Reinforced PVC
Floor Shipping Weight:
90 lbs
Seams:
Quadruple Overlap
Air Valves:
Recessed One-Way
Speed (approx.):
30 mph (40HP w/2 adults)
Inflation & Assembly:
40 min.

Note: Specifications and accessories are subject to change without notice. Max O/B Motor means: maximum power of outboard motor that can be safely used to plane the boat loaded to the maximum capacity at normal water surface conditions. Please exercise common sense and caution when using maximum motor capacity. Do not jump from wave to wave as new 4-stroke motors are much heavier then 2-stroke and provide extra strain on the transom. Under normal circumstances, with half the maximum persons/load capacity, 50% of maximum O/B power rating may be necessary to put boat on plane.

I am really happy with this boat, the thickness of the material and overall quality exceeds expectations.

BoatsToGo customer service is top notch. They tirelessly worked with me to correct a series of problems caused by the delivery service (no fault of BoatsToGo).

I would recommend this company to anyone due to their excellent customer service and quality products at great prices!
Write a review

Recommended Accessories