|
|
12' Heavy-Duty Kayaks with Re-Enforced Bottom Tubes.
Saturn NEW Heavy-Duty RK375W kayaks are specifically designed
for situation when there is a risk of scratching or puncturing lower tubes with
sharp rocks in a shallow bodies of water. Basically, these
new kayaks are based on our
popular Expedition kayaks. We have added second layer of PVC fabric along lower
partition of kayak tubes and we added rub strakes along kayak sides for an additional protection.
These new RK375W kayaks are made of the same heavy-duty 1100 Dtex PVC as Saturn inflatable boats and rafts. The 2" thick air deck floor is made of a drop-stitch fabric that is extremely rigid when inflated, but can be rolled up when deflated.
RK375W resembles in its appearance our other popular model - whitewater kayak WK375, however difference is thickness of the floor which is 2" as opposite to 4" in white water kayaks, and lack of self-bailing holes. This kayak is basically close in its functionality to Expedition kayaks, that is why it called RK, but with additional rub strake and re-enforced lower tubes.
RK375W can be used on slow to medium rivers, lakes, rocky bays and calm ocean. However, our white water river kayaks comes with 4" thick air floor and more suitable for class II and higher rapids.
Same as our popular Expedition kayaks, RK375W kayak is not a self-bailer. If that is absolutely necessary, you can cut dime-size holes along floor perimeter of RK375W to let excess water to escape, but it will not be a dry ride. It is recommended to add several flotation PFD cushions on top of the floor for added buoyancy and for more drier ride.
If
you need to move kayak seat slightly higher, type IV flotation
cushion, that is sold for around $10 in many retail and outdoor
stores, fit nicely on a bottom of this kayak and right under
kayak seat. It also will act as PFD in case of emergency, or sit
cushion once you get ashore.
RK375W kayak comes with 2 skegs and 4 pre-installed D-ring to accept 1 kayak seat. Additional 4 D-rings are provided to be glued anywhere in a kayak for additional customization. You can glue more D-rings somewhere in front to accept second kayak seat for example, or use them for whatever settings you like.
- Heavy duty 1,100 Dtex High Strength PVC fabric coated on both side with 1100 g/m2, 0.9mm. Fabric is thick, puncture proof and abrasion resistant.
- Rub strake protector along kayak sides.
- 2" thick high-pressure air deck drop stitch floor.
- 2nd layer of 1100 Dtex PVC along bottom of kayak tubes.
- 2 plastic skegs at the bottom for directional stability.
- Industry standard Halkey-Roberts flat valves design.
- Accessories: hand pump, repair kit and carry bag.
- FREE, complimentary generic high-volume hand pump also included.
- 4 pre-installed D-rings plus 4 additional D-rings to be installed anywhere.
- Kayaks seats are optional, and available in our accessories section.
- Optional dolly cart and high-performance kayak paddles are available.
|
|
|
||||||
![]() |
![]() |
![]() |
||||
| waterproof radio | carry carts | kayak seats | kayak paddles | |||
| Model |
RK375W |
| Overall Length | 12' |
| Overall Width | 3' |
| Interior Width | 14" |
| Tube Diameter | 12" |
| Air Chambers |
2+1 |
| Kayak Weight | 40 lbs |
| Shipping Size | 45 x 24 x 13" |
| Persons Capacity | 1+1 |
| Weight Capacity | 600 lbs |
| Color | yellow |
|
||
![]() |
![]() |
|
![]() |
![]() |
|
![]() |
![]() |
|
![]() |
![]() |
|
![]() |
![]() |
|











